Ender 3 Max - v4.2.7 Control Board
(Initial Beta Release)

Ender3-Max-v4.2.7-<date>.bin
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Adds M600 - Filament Change
 - Adds M603 - Set Filament Load / Unload length
 - Adds M701 - Load Filament
 - Adds M702 - Unload Filament
 - Enabled Advanced OK
 - Enabled CLASSIC_JERK
 - Enabled Filament Sensor (Microswitch based)
 - Enabled Meatpack
Firmware Variant Size Build Date Downloads Feedback Download
Ender3-Max-v4.2.7-20251005.bin 174880 bytes 2025-10-04 23:18:45 UTC 2
Score: 0
Membership Required
commit a506701a8b3db72316c0914919c0da706341b807
Author: Sylvain <67423638+Le-Syl21@users.noreply.github.com>
Date:   Sat Oct 4 21:23:40 2025 +0200

    ✨ WANHAO_D9 (need EXP) (#28073)

commit b60838508b085e92d8faf0a68139da304b851283
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 23:17:51 2025 -0500

    🧑‍💻 Simplify some flag params

commit 0f76f17f16c0b473c170fd7ab526f4846047117f
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Oct 4 00:28:11 2025 +0000

    [cron] Bump distribution date (2025-10-04)
Ender3-Max-v4.2.7-20251004.bin 174880 bytes 2025-10-04 00:18:46 UTC 0
Score: 0
Membership Required
commit c00415b017ccb7d347c463c57b996e85da14c184
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 18:49:34 2025 -0500

    🧑‍💻 Simpler M260 R S

commit 3b149c3505d315b7b760961b00e6812d186fe593
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 14:16:07 2025 -0500

    Skip zero length homing_move (#28090)
    
    Fixes #23227
    
    Co-authored-by: Alexey Melnikov <917089+sorgelig@users.noreply.github.com>

commit d20d1f87124311442d91a8c9c2acf081f7332042
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 11:41:55 2025 -0500

    🔨 Extend misplaced config check (#28093)

commit c626e3efb2ecdbdc434bf2c88a17dc304cf29245
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 09:50:35 2025 -0500

    🩹 BLTouch raise before deploy
    
    Fixes #28092

commit 1cea29598c916d28dce85e53a9ef41dde9039e14
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Oct 3 00:29:01 2025 +0000

    [cron] Bump distribution date (2025-10-03)
Ender3-Max-v4.2.7-20251003.bin 174888 bytes 2025-10-03 00:18:46 UTC 0
Score: 0
Membership Required
commit cb0706f9cc4bfb64148cc20188e831af71a51c31
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Oct 2 13:43:42 2025 -0500

    🔨 Fix misplaced config files check
    
    Fixes #28091

commit dadbedc4fd35e837c1efbe974d97745c289147e5
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Oct 2 01:07:48 2025 -0500

    📝 Prettier FINDA protocol

commit 3165beeba0a6bfd7f1a1d1dc34f962e666ea6191
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Oct 2 00:53:09 2025 -0500

    🩹 Mitigate watchdog timeout for file ops
    
    See #28064, #28069

commit 1c9b1240ecb272d576c8f6912823b17d4baa2378
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Thu Oct 2 06:51:11 2025 +0200

    🔧 Option to use FT_MOTION for homing / probing (#28030)
    
    Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

commit 122dfa13a2c12e1fdfe3c5a8503d420d11f2024d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Oct 1 21:09:41 2025 -0500

    🧑‍💻 Compatible sorted 'find'

commit b32a818f371f00d9e09f13192da21c062ae67738
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Oct 2 00:29:06 2025 +0000

    [cron] Bump distribution date (2025-10-02)
Ender3-Max-v4.2.7-20251002.bin 174880 bytes 2025-10-02 00:18:46 UTC 0
Score: 0
Membership Required
commit d8b83160ab707b0a585b51100dc99e4590cb4609
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Oct 1 18:53:24 2025 -0500

    🔧 Configurator options TFT_FONT / TFT_THEME

commit 98d79fb8bb8deccebfed3d44d56dbdc7abb8460f
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Oct 2 12:21:14 2025 +1300

    🐛 Fix 'T' tool index handling (#28086)

commit eaefa299fb10372cbf68610bf5df9927829df34c
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Thu Oct 2 00:27:47 2025 +0200

    ⚡️ FTMotion Trajectory: Fix for short blocks (silent curves), add S-curve (#28082)

commit ba840750a0102e621eabb93c507c39dc8885709f
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Thu Oct 2 11:26:11 2025 +1300

    🔨 Fix font data script #include handling (#28085)

commit cdc960fd1de2467a309f53ba6763a8248d81d343
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Wed Oct 1 16:47:10 2025 -0400

    🔨 Remove (BSD) -d flag from 'find' (#28013)

commit c0a544d38566661bc52be3bdc996c4741cae8694
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Oct 1 14:18:39 2025 -0500

    🚸 Filament Sensor, M412 changes
Ender3-Max-v4.2.7-20251001.bin 174752 bytes 2025-10-01 00:18:46 UTC 3
Score: 0
Membership Required
commit 84b22fcc1d146c57a1b5a8aa2b7f6619b2f9a23c
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Sep 30 00:30:12 2025 +0000

    [cron] Bump distribution date (2025-09-30)
Ender3-Max-v4.2.7-20250930.bin 174752 bytes 2025-09-30 00:18:46 UTC 0
Score: 0
Membership Required
commit c6cd10a92d6faadc135a0637eaf1783667a277bd
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Mon Sep 29 15:24:58 2025 -0500

    🧑‍💻 Shaped axis macros, etc. (#28084)

commit d08a7d4fd2946d7ba8eb1b3032f5c66e563ed772
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Sep 29 00:31:25 2025 +0000

    [cron] Bump distribution date (2025-09-29)
Ender3-Max-v4.2.7-20250929.bin 174752 bytes 2025-09-29 00:18:47 UTC 0
Score: 0
Membership Required
commit 0ee1c1e4e15f818aba25f473e388484276882144
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Mon Sep 29 01:14:14 2025 +0200

    🐛🚸 Fix stale LA block flag, FT Motion reporting (#28078)

commit dc9e57464fbd89c851524f2282bfd9e5711cdbf4
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Sun Sep 28 02:42:33 2025 +0200

    ✨ FTMotion Z shaping, axis sync, axis smoothing (#28055)

commit 657929740f079810bf8f5b5bbed792ca341e8db0
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sun Sep 28 00:34:33 2025 +0000

    [cron] Bump distribution date (2025-09-28)
Ender3-Max-v4.2.7-20250928.bin 174752 bytes 2025-09-28 00:18:45 UTC 0
Score: 0
Membership Required
commit 6e74409c14bb4afb7ffb8bbba3deabec14883d89
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Sat Sep 27 02:25:03 2025 -0500

    🐛 Fix STM32 I2C 2-wire LCD, Soft I2C impl. (#26433)

commit 5af84257765b33ae510a40938585a872e017e069
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Sep 27 00:29:05 2025 +0000

    [cron] Bump distribution date (2025-09-27)
Ender3-Max-v4.2.7-20250927.bin 174752 bytes 2025-09-27 00:18:45 UTC 1
Score: 0
Membership Required
commit 0ca860b2928321b7a9c0f159642bc835e3f68002
Author: ThomasToka <117008525+ThomasToka@users.noreply.github.com>
Date:   Fri Sep 26 23:16:39 2025 +0200

    🧑‍💻 Resolve unused ftm_active warning (#28076)

commit 4dd5b713eb557cefbb693c67c0367a42dee43b8c
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date:   Fri Sep 26 21:03:53 2025 +1200

    🚸 M402 Report (BLTouch HS Mode) (#28072)

commit 0628573fc305fd1df48a3d20324f830cb4448bc8
Author: 12oclocker <73079144+12oclocker@users.noreply.github.com>
Date:   Fri Sep 26 04:21:43 2025 -0400

    🩹 Prevent RAMPS default `X_MAX_PIN` messing up AnyCubic i3 Mega (#28038)

commit 52cc705e60bb88ed72f6e573924bbb885f06b909
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Sep 26 02:40:28 2025 -0500

    🧑‍💻 Use basic PGM string with "S_FMT"

commit 2f987accaa78eca814f2eac32d32b4f627071e79
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 25 23:52:57 2025 -0500

    🧑‍💻 Pass Z to UBL::shift_mesh_height
    
    Co-Authored-By: Selali <17497673+selalipop@users.noreply.github.com>

commit 66aa848b2f3238093d9038bed9f31738bddf0144
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 25 23:39:52 2025 -0500

    🐛  Trigger instant runout on filament jam (#28074)

commit 6f3de26a4d9a2ccdeb83c3b0057b78b1ab1c9ab0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 25 23:32:32 2025 -0500

    ⚡️🧑‍💻 Prefer float over float& (#25716)

commit b723e3fd0233a3519344f9de3f060be1fcd65315
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 25 22:18:15 2025 -0500

    🩹 Resume motion tracking on runout.reset()
    
    Fix an issue where the filament motion sensor is ignored after a runout is resolved.

commit 7e4c6db12dfef9e3ab80a22e0abb9b4bc0a9fdcf
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Fri Sep 26 00:29:25 2025 +0000

    [cron] Bump distribution date (2025-09-26)
Ender3-Max-v4.2.7-20250926.bin 174744 bytes 2025-09-26 00:18:44 UTC 0
Score: 0
Membership Required
commit e228a222a375668f11817be619d8b411b1ab34cb
Author: narno2202 <130909513+narno2202@users.noreply.github.com>
Date:   Thu Sep 25 22:47:31 2025 +0200

    🩹 Fix LA block flag for FTMotion (2) (#28070)

commit fdac56da1519e48459a89a4608a0451787b076d3
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Thu Sep 25 12:12:25 2025 +0000

    [cron] Bump distribution date (2025-09-25)

commit 7e62b60c94714e3ca85c0a76e511095c0ddaec20
Author: BeowulfNode42 <dlimmage@gmail.com>
Date:   Thu Sep 25 18:09:21 2025 +1000

    🔧 Allow CHITU3D V6 override of Z_STOP_PIN (#28059)

commit b6b0fccd5f52ea8e6cb31fdf1988fc3e58a51ba1
Author: Andrew <18502096+classicrocker883@users.noreply.github.com>
Date:   Thu Sep 25 03:27:46 2025 -0400

    🚸 ProUI updates for Linear Advance (#28067)
Ender3-Max-v4.2.7-20250925.bin 174744 bytes 2025-09-25 00:18:45 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250924.bin 174744 bytes 2025-09-24 00:18:46 UTC 0
Score: 0
Membership Required
commit f2f6b6bd8528650beb9202efcde6ceda350b86ae
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Tue Sep 23 18:09:48 2025 +0000

    [cron] Bump distribution date (2025-09-23)

commit 6ff18a942c1cd926af3d77f10bcf086ecea3ad2a
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Tue Sep 23 20:02:44 2025 +0200

    🩹 Fix LA block flag for FTMotion (#28065)
Ender3-Max-v4.2.7-20250923.bin 174744 bytes 2025-09-23 00:18:45 UTC 1
Score: 0
Membership Required
commit 25a2a895172e082df5dc112ca277f85eeefd12bf
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Mon Sep 22 00:33:02 2025 +0000

    [cron] Bump distribution date (2025-09-22)
Ender3-Max-v4.2.7-20250922.bin 174744 bytes 2025-09-22 00:18:45 UTC 0
Score: 0
Membership Required
commit 5917aa73b51e77b28748cf7a73bd892775fc2128
Author: David Buezas <dbuezas@users.noreply.github.com>
Date:   Mon Sep 22 00:21:53 2025 +0200

    ⚡️ Fix K, improve FTMotion linear advance (#28058)
Ender3-Max-v4.2.7-20250921.bin 174744 bytes 2025-09-21 00:18:44 UTC 0
Score: 0
Membership Required
Ender3-Max-v4.2.7-20250920.bin 174744 bytes 2025-09-20 00:18:45 UTC 0
Score: 0
Membership Required